Bandwidth Monitor Tool - Knowledge Base

Toll Free US: +1 888 720 9500 | Intl: +1 925 924 9500

OpUtils

Network Monitoring Toolset

Solutions for:

Network Engineers | Network Administrators

OpUtils is a comprehensive set of 30+ tools that helps network engineers monitor, diagnose & troubleshoot their IT resources.

Switch Port Mapper to find what's connected on every port.
IP Address Manager to track IP usage in the network.
Rogue Detection to detect any unauthorized access.
Cisco tools to backup startup & running config files.

Success Stories "Oputils has given me a single interface to monitor, isolate and troubleshoot network related problems usually before they are noticed by the end user base."
- Jude Croyle, Director - IT, Meet Minneapolis	More »

	Support Switch Mapper - Knowledge Base Cisco Tools - Knowledge Base Bandwidth Monitor - Knowledge Base 1. Bandwidth Monitor does not show any utilization information. Bandwidth Monitoring of all the interfaces will happen at a pre-defined interval of 5 minutes. The In and Out bandwidth utilization values in the summary view will appear in the next polling cycle, i.e., after 5 minutes, which will be the cumulative bandwidth utilization value in the past 5 minutes. If problem persist try changing the SNMP version as explained here. Questions 2. The interface speed shown in the Bandwidth Monitor tool is incorrect? Is there a way I can change this manually? The speed of the interface shown in the Bandwidth Monitor tool is retrieved through SNMP from the device. If this is not properly configured, you might see an incorrect value and subsequently incorrect utilization percentages as it is calculated based on the speed of the interface. To change the Speed manually, connect to http://localhost:7080/network/ifSpeedChange.jsp, change the value and Save. Questions 3. What is the significance of the SNMP version shown while adding an interface? Do I need to change it? The SNMP version of the device is automatically detected by OpUtils based on the initial responses from the device. You need not change the version while adding the interfaces. But, in some devices, there could be cases where the subsequent queries to the device will not get the required results. In such cases, the bandwidth utilization of the interfaces will not be shown even after two polling cycles (10 minutes). If you face this problem, delete all the interfaces and add them again by selecting a different SNMP version (if v1 is auto-detected, select v2c and add) If problem persists, contact support@oputils.com with the Support File Questions Steps to Create Support File for Bandwidth Monitor Select Admin --> Settings --> General tab Change the Log Level to INFO and Save. Delete and add the interfaces again in the Bandwidth Monitor tool. Wait for 10 minutes. Select the Support tab and click Create Support File link Upload the file from http://bonitas.adventnet.com/upload/index.jsp?to=support@oputils.com Support Switch Mapper - Knowledge Base Cisco Tools - Knowledge Base

Enterprise Management & Security Products
Active Directory Management Application Monitoring Asset Management Customer SupportDesk Desktop Management EventLog Analyzer Facilities Management Firewall Analyzer Free Active Directory Tools Free Windows Tools HelpDesk Hosted Website Monitoring Service	MSP Platform Network Configuration Management Network Monitoring Network Security Scanner Password Management Self-Service Password Management Storage Management Software Switch Port & IP Address Management Traffic Analysis & Network Forensics VoIP Monitoring WiFi Manager

Product Info

Features

Tools

Forums

View All Forums

The role of an Network Administrator is to manage all the network resources efficiently. The administrator has to monitor the health and availability of the devices, check for disk space in critical servers, backup the configuration of routers/switches, monitor the bandwidth, restrict unauthorized network access, identify the devices connected to switch ports, and more. While it is possible to achieve this with several tools available in the market, an integrated solution is the need of the hour when it comes to troubleshooting and correlating data between several tools.

OpUtils with is integrated set of network monitoring tools helps them to perform these tasks efficiently. It includes tools for Network Diagnostics, Address Monitoring, Network Monitoring, SNMP Monitoring, Server Monitoring, and Cisco Monitoring. It correlates the results of the various tools and presents it in the form of reports that helps an administrator to get an integrated view. Above all, most of the tools can be scheduled to run periodically, which helps them to automate the task thereby reducing manual intervention.

Would you like to download OpUtils now and try it yourself?

Would you like to be contacted for a quick live demonstration of OpUtils?

	AdventNet, Inc. All rights reserved. Trademarks \| Privacy Policy \| Site Map \| Contact Us \| Careers \| Tell Us

	Edit Reseller

OpUtils

Network Monitoring Toolset

1. Bandwidth Monitor does not show any utilization information.

2. The interface speed shown in the Bandwidth Monitor tool is incorrect? Is there a way I can change this manually?

3. What is the significance of the SNMP version shown while adding an interface? Do I need to change it?

Steps to Create Support File for Bandwidth Monitor