|
Service Pack README
AdventNet ManageEngine® OpStor is an san area networks management tool
that helps you to monitor fault, performance and availability of
fabric switches, Storage arrays RAID, Tape libraries, Host servers and
Host bus adapters. It renders a holistic view of your san
networks through a single web console. It notifies problems
in the san network through E-mail, SMS etc. and provides graph
and reports that display performance and availability information
of san elements.
OpStor 5.9
- New Devices Supported
- StorEdge 6920 Array
- Hitachi TagmaStore (SMI)
- Enhancements made in IBM 3584 tape library to show the total number of slots.
- Exception in edit action of Schedule Alarm Action fixed.
- Escalate Unattended Alarms functionality enhanced to support minutes check.
- Issue in Run Command option of Schedule Alarm Actions is fixed.
- Minor issues in display name fixed.
- Code enhanced to use different file names to save the Top N availability pdfs.
- Enhancements made in IBM FastT array to show the Volume Groups free memory correctly.
- Code enhanced to show the FastT free capacity correctly.
- Enhanced Telnet commands for AIX 5.1 and above.
- Code enhanced to suppress info alarms generated from switches.
- Minor issue in memory utilization of hosts fixed.
- Hosts telnet command prompt issue fixed.
OpStor 5.8
- New Devices Supported
- HP ESL Tape Libraries
- HP EML Tape Libraries
- Option provided to change the display name of fabric switch ports.
- Basic level thresholding option provided for storage arrays and hosts.
- Maps issue in linux/unix systems fixed.
- Issue in processing Raid level of EMC CLARiiON Raid Group fixed.
- Enhancement in McData Switch zone parsing.
- Disabled monitoring of unmanaged ports for EMC CLARiiON.
- Minor enhancement in HP EVA SMI based modelling.
- Code enhanced to support EVAPerf remote installation via OpStor proxy.
- Performance polling problem in SMI Provider host Command View EVA host resolved.
OpStor 5.7
- New Devices Supported
- HP EVA (Command View EVA Version 6.0 and above)
- Hitachi Lightning 9900 V series
- Infortrend Code enhanced to support latest SNMP MIB.
- HP MSA code enhanced to support HTTP communication.
- Minor alarms issue addressed
- LSI array pre-modelling checks enhanced
- HP EVA discovery checks enhanced
- NetApp Array capacity display problem fixed
- Infortrend Raid Partition size display problem resolved
OpStor 5.6
- Dynamic update of Fabric Switch Links supported
OpStor
5.57
Issues Resolved
- Fabric Switch port name display issue fixed
- Alarm generation for LUN renaming case handled
- Issue in host performance data collection fixed
OpStor 5.56
- New Device Supported
- HP StorageWorks MSA 1000,1500
- Issues Resolved
- Issues in EMC CLARiiON performance statistics reports fixed
- Issue in Host interconnect info fixed
- LSI / IBM / Flexline Raid capacity display problem resolved
- Infortrend Raid discovery issue fixed when controller name
is empty
OpStor 5.54
- Issues Resolved
- IBM 3584 / TS3500 tape library modelling issue resolved
- Problem in LSI Array Performance data collection solved
- Repeated alarm generation problem for unmanaged LSI array
controller ports resolved
- Included batch script to change OpStor web server port
OpStor 5.5
- Fibre channel port interconnect reports enhanced
- Inventory summary reports enhanced for all SAN infrastructure
types
- Storage array capacity performance reports supported
- Issues Resolved
- Tuned SMcli parser to handle minor syntax variations for
IBM / STK arrays
- Issue in Brocade Switch Zone info parsing resolved
- Issue in HP EVA Performance data parsing resolved
- Issue in EMC Performance reports for SP/Disk/LUN Utilizations
resolved
- HP EVA client pages alignment issue fixed
- Issue in HP EVA Disk Enclosure status updation fixed
- Issue in event generation when a storage system is deleted
and added again
- Home page display issue when devices are partially discovered
OpStor 5.4
- Top N performance & comparison reports for Fabric Switch
Ports
- New devices supported
- IBM 3584 / TS 3500 Tape Library
- Dynamic updation of LUNs, Disk drives, Virtual disks, Disk
groups & Disk Enclosures (addition, deletion & updation)
for HP EVA
- Alarms generated for HP EVA communication failure/recovery
- Headers added in PDF generation of Performance Reports
- Increased Telnet login timeout for discovering Host Servers
- Launch WebApp added for HP EVAs
- Issues Resolved
- Fixed HP EVA discovery issue for Array names with spaces
- Fixed QLogic SANBox Switch Port Speed & status display
issues
OpStor 5.3
- Colour coded icons reflecting state change alarms for storage
array sub-components (DiskDrives, Volumes , RaidGroups ,LUNs etc).
- Enable/disable performance statistics option added for storage
arrays
- Test mail feature supported for "Configure Mail Server"
option.
- Host/HBA details supported for HP Command View EVA
- Fabric switch zoning enhanced
- Export pdf option for performance reports added
- Logging enhanced
- Issues Resolved
- Issue in displaying disk enclosure information in HP EVA
arrays
- Issue in Mail Server configuration
- Issue in setting Performance Monitoring Interval
OpStor 5.2
- Performance reports for HP EVA arrays (via evaperfutil
utility)
- Array Statistics
- Total Host Req/s, Total Host MB/s
- Array Controller Statistics
- Virtual Disks
- Read Hit Req/s
- Read Hit MB/s
- Read Hit Latency(ms)
- Read Miss Req/s
- Read Miss Req/s
- Read Miss MB/s
- Write Req/s
- Write MB/s
- Write Latency(ms)
- Flush MB/s
- Host Port Statistics
- Read Req/s
- Read MB/s
- Read Latency(ms)
- Write Req/s
- Write
MB/s
- Write Latency (ms)
- Av. Queue Depth
- Physical Disks
- Drive Queue Depth
- Drive Latency(ms)
- Read Req/s
- Read MB/s
- Read Latency (ms)
- Write Req/s
- Write MB/s
- Write Latency(ms)
- Physical Disk Groups
- Average Drive Queue Depth
- Average Drive Latency(ms)
- Average
Read Req/s
- Average Read MB/s
- Average Read Latency(ms)
- Average
Write Req/s
- Average Write MB/s
- Average Write of Latency(ms)
- Performance reports for IBM FastT / StorageTek /
LSI Storage arrays
- Includes reports for Controllers, Volumes and Array
for the following stats (via SMcli utility),
- Total IO Count
- Read Percentage
- Cache Hit Percentage
- Current Data Transfer Rate
- Maximum Data Transfer Rate
- Current IO Count
- Maximum IO Count
- Issues Fixed
- Issue in FC Switch performance reports when community name
is other than default "public".
OpStor 5.1
- IBM FastT / StorageTek / LSI Storage array feature enhancements
- Monitoring via CLI interface supported (using SMcli utility)
- Inventory information enhanced
- Tray/ Enclosure Component health included
- Host Group information included
- Status alerts for Disk Drives, Volumes, Volume Groups
- EMC Centera Storage System supported
- Inventory information of physical components ,
- Centera Cluster
- Centera Nodes (Access & storage)
- Centera Internal Switches
- Logical configuration details
- CenteraClusterPools
- CenteraProfiles
- Monitoring
- Cluster status
- Node status
- Free space of Clusters / Nodes
- Reports:
- Availability reports for Cluster
- SNMP trap based alarms
- Issues Fixed
- Issue in displaying Links between NetApp storage array and
FC Switch.
- Issue in discovering partitioned Fabric director switches
- Issue in zooming performance graphs of EMC CLARiiON array
OpStor 5.0
- Device performance reports added for
- EMC CLARiion RAID
- Hitachi RAID
- Accordance RAID
- Infortrend RAID
- Host servers
- New devices supported
- HP Storage Works Enterprise Virtual Array
- Areca RAID
- Inventory Summary Reports added for
- Fabric Switches
- Storage Arrays
- Tape Libraries
- Host Servers
- HBAs
- Client look & feel enhancement for Home page
- Trap Forward feature supported
- Auto refresh feature integrated for Home, Alarm and Device Inventory
pages
- Custom device add facility in Add Device
- Replaceable custom tags supported in Schedule Alarm actions
OpStor 4.12
- Alarms generated for EMC CLARiiON snmp traps
- Fabric Switch summary report incorporated
- PDF generation for EMC CLARiiON Raids
- Limitations
- AdventNet HBA Agent service may not start in some Windows
2003 servers. The AdventNet HBA Agent application can be used
as a workaround in this case (till fix is available).
OpStor 4.11
- Dynamic login/update supported in web-client for viewing Zone
configuration of McData switches
OpStor 4.1
- New devices supported
- Cisco SN 5428 -K9 Storage Router
- FC Switches feature enhancements
- Dynamic login/update supported in web-client for viewing
Zone configuration of Brocade switches.
- Miscellaneous feature enhancements
- Option to run OpStor as a Windows Service
- Issues Fixed
- Issue in displaying Links between EMC CLARiiON RAID and FC
Switch
- Issue in displaying EMC CLARiiON RAID after discovery
- Alarm e-mail notification issue addressed
OpStor 4.0
- New devices supported
- RAIDs
- EMC CLARiiON
- Infortrend
- Hitachi AMS
- Tape Libraries
- DELL PV132T / PV136T
- IBM SLX 4560
- Qualstar RLS & TLS series
- FC Switches feature enhancements
- Zone views for Brocade switches
- RAIDs feature enhancements
- LUN, Raid Group, volume, host-mappings information for EMC
CLARiiON, Hitachi, StorageTek, and IBM FastT series
- Host servers feature enhancements (for IBM AIX , Windows)
- Memory and CPU utilization dashboards
- Disk I/O statistics
- Host devices information
- Multi Language Support
- Internationalization support - OpStor can be localized to
any language now
- Korean , Japanese , Chinese languages supported by default
- Miscellaneous feature enhancements
- Export PDF for all inventory pages
- WWN reports in map view
- Issues Fixed
- Discovery issue in ADIC tape libraries / Hitachi RAIDs
- Version issues in LSI / StorageTek /IBM FastT RAIDs
OpStor 3.1
OpStor 3.0
|
|
