Toll Free US: +1 888 720 9500
Intl: +1 925 924 9500

OpStor

Multi-Vendor Storage Management

OpStor is a heterogeneous storage infrastructure monitoring solution that helps enterprises to monitor their storage resources.
  • Multi-vendor storage infrastructure management
  • Pro-active Fault and Performance monitoring
  • Visualize SAN availability and health
  • Detect problems with utilization and availability of storage devices.
Success Stories
"OpStor lets us monitor our entire storage environment, Servers, HBA's, Switches, and the SAN." - Bryan Dearlove, - Information Guelph General Hospital Download 21-Day Trial

Monitoring and Management of DELL PV 132T / PV 136T Tapelibraries in SAN networks

OpStor provides monitoring and management of DELL PVT 132T and DELL PVT 136T Tapelibraries

Models Supported

  • DELL PV132T
  • DELL PV136T

Features supported
Inventory Details Logical Details Monitors Report Details
  • TapeLibrary
  • Tape Drives
  • Drive ports
  • Interconnect details
  • Partitions
  • Movers
  • TapeLibrary status
  • Tape Drive status
  • Drive port status
  • TapeLibrary Summary
  • Availability Trends
  • Performance statistics

Prerequisites for monitoring DELL PV132T / PV136T
  • In the Remote Management Unit (RMU) ensure that the SNMP agent is running
  • Register OpStor server IP address as trap destination
  • Check if the snmp community name configured as public 
  • To ensure this check the value of Public Name under Configuration tab->SNMP Configuration area.
    Note : If a different community is used, it needs to be specified when you add the device via OpStor
  • Dell PV 136T is essentially a rebranded version of ADIC scalar 100 Tape library
    http://www.adic.com/us/collateral/omS100UsersGuide.pdf
  • Also refer the section Configuring SNMP in Chapter11 - Using the Remote Management Unit

Prerequisites for monitoring DELL PV132T / DELL PV 136T
  • Ensure that the SNMP agent is running.
  • Register OpStor server IP address as trap destination
  • Details are available  in ADIC Scalar i2000 User's Guide at
    http://www.adic.com/us/collateral/omSi2kUsersGuide.pdf
  • Also refer the section Registering traps in  Chapter5 - Configuring the Library

Steps to add DELL PV132T / DELL PV 136T in OpStor
  • Navigate to Admin Tab-->Manage Storage Devices link in OpStor
  • Provide IP Address of DELL PV 132T / DELL PV 136T Tapelibrary
  • Select SNMP option
  • Provide snmp port and community details (default is 161 and public)
  • Click Add Device