Monitoring Adic Scalar i2000 & 100 tape libraries using OpStor

OpStor provides monitoring and management of Adic Scalar i2000 & Scalar 100 tape libraries

• Complete inventory information of physical components ,
• Tape Library
• Tape Drives
• Monitoring
• Tape library status
  
• Tape drive status
• Reports:
• Availability reports for Tape library & tape drives
• Monitoring and alarm generation for faulty conditions (via SNMP traps)
  
• Sensor state change (Voltage ,temperature,cooling)
• Tape library state change
• Tape drive added/removed
• Media mounted /unmounted

Features Supported For Adic Scalar 100

• Complete inventory information of physical components ,
• Tape Library
• Tape Drives
• Logical configuration details
  
• Library partitions
• Movers
• Monitoring
• Tape library status
  
• Tape drive status
• Mover status
• Reports:
• Availability reports for Tape library
• Monitoring and alarm generation for faulty conditions (via SNMP traps)
  
• Tape library state
• Door state
• MailBox state
• Error notification
• Shutdown notification
• Service Action Code (SAC) notification

Prerequisites for Monitoring Adic Scalar 100

• In the RemoteManagementUnit (RMU) ensure that the SNMP agent is running.
• Register OpStor server IP address as trap destination
• Has the snmp community name configured as  "public" ?  To ensure this check the value of Public Name under Configuration tab->SNMP Configuration area. (If a different community is used , it needs to be specified when you add the device via OpStor.)
• Details are available  in ADIC Scalar 100 User's Guide at,
  http://www.adic.com/us/collateral/omS100UsersGuide.pdf
  Refer the section "Configuring SNMP" in  Chapter-11 (Using the Remote Management Unit) .
  

Prerequisites for Monitoring Adic Scalar i2000

• Ensure that the SNMP agent is running.
• Register OpStor server IP address as trap destination
• Details are available  in ADIC Scalar i2000 User's Guide at,
  http://www.adic.com/us/collateral/omSi2kUsersGuide.pdf
  Refer the section "Registering traps" in  Chapter-5 (Configuring the Library) .

Steps to add the device for monitoring in the OpStor Browser client

• Navigate to 'Admin tab' --> 'Manage Storage Devices' link in OpStor Webclient
• Provide the IP Address of the Adic Scalar i2000 / 100 series tape library in the "IP Address" text field
• If the read community is other than "public" , choose 'SNMP' option and specify it in the "community" field
  
• Click "Add Device'.